This help page outlines help resources for the DJI Inspire copters.
Both the Inspire 1 and Inspire 2 are covered in this section. The only difference between these parachute systems is the mount for each copter. Other than that both systems use the same Skycat launcher, and the same harnesses and rigging materials.
Both Inspire systems consist of:
- Skycat X48 Parachute Launcher Kit
- IFC-48-SUL Parachute rated at 3.2Kg @ 4.6 m/s
- 2 yard Spectra shock cord
- 2 x 8" Spectra Harnesses
- Quick Link
- Carbon Fiber mount. There are two different mounts
- 3S, 800mAh 45C Lipo Battery.
- Optional Skycat Rescue Radio to trigger Parachute
- Optional Mayday Failsafe Controller
- Velcro and wire ties to assist with mounting.
Inspire Help Recources and Links:
- Pack and Load the Skycat Parachute Launcher - Load the Skycat launcher before mounting to your Inspire copter.
- Connecting Skycat Inspire Mount with the Mayday - This photo album shows how to install the electronic parts into the Inspire copter equipment box. And then how to connect the Maydat to the Slycat trigger. Finally a video on how to test the Mayday.
Inspire 1 Resources
- Skycat Inspire 1 Instruction Guide - The guide from Skycat has some great information on how to install the Inspire 1 mount to the copter. There are some important differences regarding the method of folding the parachute and Fruity Chutes preferes the method in the help page How to folds and Iris Parachute. Also note the Skycat supplied harness material is not the same as the material supplied by Fruity Chutes. Both are made of Spectra and are comperable.
- Inspire 1 Drone Parachute Installation Pictorial - This is a step by step pictorial to mounting and rigging the Skycat Inspire 1 launcher.
- DJI Inspire 1 Mount Assembly document.
- Inspire 1 Mount Photos - Here are some great close up photos on the Inspire 1 mount.
- Inspire 1 Quick Start Guide
Inspire 2 Recources
- Skycat Inspire 2 Instruction Guide - The guide from Skycat has some great information on how to install the Inspire 2 mount to the copter. There are some important differences regarding the method of folding the parachute and Fruity Chutes preferes the method in the help page How to folds and Iris Parachute. Also note the Skycat supplied harness material is not the same as the material supplied by Fruity Chutes. Both are made of Spectra and are comperable.
- DJI Inspire 2 Mount Assembly document.
- DJI Inspire 2 Mount Photo Closeup
- Inspire 2 Installation Video - In the video note the Skycat supplied harness material is not the same as the material supplied by Fruity Chutes. Both are made of Spectra and are comperable.
- Inspire 2 Quick Start Guide