Parachute Descent Rate Calculator
This tool will plot the descent rate of two parachutes around the weight you specify. To use the tool:
- Enter the parachute model you want to plot. The primary chute goes on the left side. The optional chute to compare to goes on the right. Leave this blank if you do not want a second chute plotted. The form fields will auto-populate with the chutes diameter and Cd.
- You can override the diameter, or the Cd to test how a larger chute would perform or the affect Cd has on performance.
- Enter the target weight. The default is 11 lbs (5Kg). The plot will graph plus and minus the target weight.
- Hit return to update the plot after you override values. Or press Update form.
- Compare both our chutes, as well as other manufactureres products.
* IMPORTANT NOTE ABOUT REFERENCE DIAMETER: Reference Diameter is used to calcualate the descent velocity drag area. For Fruity Chutes this diameter is the sames as the diamter of the chute, which is the diameter of the skirt of the chute calculated at Pi * D / 4. For flat sheet chutes like Top Flight this is the flattened diameter of the chute, again the diameter quoted by the manufactuer. For some manufactureres the chutes the size is measured by the distance across the canopy, or in some cases it's just a model number and we are not sure of the exact size. This includes Rocket Man, Spherachutes, Sky Angle and Giant Leap TAC chutes. For these the equivalent reference diameter is calculated based on the geometry of the canopy while in flight. This then becomes the reference diameter used to calculate the descent velocity. For these chutes you will notice that the diameter is different from the size of the manufacturer. For example a Sphereachute 120" parachute has an equivalent diameter if 76.4 inches. But the Cd of the Sphereachutes is set to 1.5 so the resulting descent rate matches the manufacturers data. For these chutes the Cd is adjusted so the resulting descent rate matches the manufactureres published rates for that model. This has occationally causes some confusion for folks using the calculator on other manufactureres chutes.
Descent Rate vs Weight
Impact Energy Joules vs Weight