Recovery Tethers & Line Cutters

A recovery tether is a simple device that allows you to use dual deployment out of the same opening in your rocket. We resell the Tinder Rocketry Tender Descender recovery tethers. Use the tether with a deployment bag to hold your main chute to restrain the main inside your rocket untill you want it to come out. We feature three tether devices:

The Tender Descender HDPE is 1 ½”L x ¾”W x ¾”T (without quick links installed) and weighs in at just over 39 grams, (including quick links) yet can take an initial shock load of up to 600 pounds and will deploy with up to 200 pounds attached. This device is intended for rockets weighing up to 25 pounds. Price is just $59.

The Tender Descender L2 has the same dimensions as the HDPE version but is made from heat-treated, copper-toned, anodized aluminum. The L2 weighs just 52 grams with its stainless steel quick links, yet can take an initial shock load of as much as 2,000 pounds and will release with up to 500 pounds attached. This device is intended for the bigger rocket projects up to around 60 pounds. Price is $85.

The Tender Descender L3 for those REALLY BIG projects. This incredibly strong tether is made from heat-treated, copper-toned, anodized aluminum, and measures 2 ¼”L x ¾”W x 1”T (Without the quick links attached). The L3 weighs just 5 ounces including the ¼” stainless steel quick links. This device can take an initial shock load of over 5,000-pounds, releasing cleanly with over 1,000 pounds attached. This device is intended for rockets weighing up to 300 pounds or more. Price is $129.

All tethers work via a simple principle. Two quick-links are restrained by pins pushed through a machined housing. A small BP charge is loaded into the housing chamber in the center, just .25G for the smaller units, .35G for the larger one. When fired the pins are pushed out and the quick-links are released. The Kevlar cord keeps the pin assembley and the housing attached to one of the quick links. The other quick-link is completely released.

Tether Protector Bag When used inside a rocket airframe we also sell a small Nomex bag to place your tether inside. This both protects the airframe from the pin assembly when it releases (with some force!), as well as keeps the hot gas from the BP charge from doing and damage to your recovery gear. Order a bag along with your tether is you plan to use this inside your airframe.

Line Cutters A line cutter is a very simple device that is used to cut a piece of nylon wire tie to allow your chute to open, or to release your chute or anything else. It can also be used to reef a chute. We feature the Archetype Line Cutter.

     
Anodized Aluminum L2 Recovery Tether, Up to 60lb Rockets

Anodized Aluminum L2 Recovery Tether, Up to 60lb Rockets

The Tender Descender Aluminum L2 Recovery Teather has the same dimensions as the HDPE version but is made from heat-treated, copper-toned, anodized... more info
Recovery Tether Sheath

Recovery Tether Sheath

This simple Nomex sheath is designed to slip over your Tether and restrain the pins from hitting your airframe when using inside your rocket. It also... more info
Stainless Steel Cable Cutter

Stainless Steel Cable Cutter

Archetype Cable Cutter Designed to be the safest single-tube dual deployment unit possible, the Cable Cutter can be positioned next to the parachute,... more info